MultiCS Güncel - MultiCS r100-rc53 Public Insider - Broken Arrow - MEGAcACHE - Version: xDecrypt | MULTiCS & OSCam EXCHANGE TÜRKFORUM®

MultiCS Güncel MultiCS r100-rc53 Public Insider - Broken Arrow - MEGAcACHE - Version: xDecrypt

Durum
Üzgünüz bu konu cevaplar için kapatılmıştır...

Astra2

Süper Moderator
Yönetici
Katılım
13 Eki 2020
Mesajlar
162
Tepkime puanı
305
Puanları
76
Ofline
release date: 15.2.2022

MultiCS r100-rc53 Public Insider - Broken Arrow - MEGAcACHE - Version: xDecrypt - 2c2abcb63edce22d95a29651dc84e14153376ac6

CHAHNGES FOR rc53:
------- added support for oscam AIO , for this add to CS378X SERVER: ...... { cacheex_mode=2; cacheex_aio=1; } --------
------- improved bad dcw management and added BadDCW page for better easiest debug --------
------- for actiovation of this page use option: HTTP BADDCW: YES --------
------- if you want disable cacheex messages as there are many lines, you can use option --------
------- BAD_DCW_CS378X_DEBUG ACTIVE: NO --------
------- there is also possible log to file with option -l example: /usr/local/bin/multics -l -b -c /config_path/config.cfg --------
------- added option: AUTOREMOVE_LOG_FILES_ABOVE_10M ACTIVE: YES to remove log files above 10 MB --------
------- it removes files: /var/tmp/multics.log and /var/tmp/multics.baddcw_log --------
------- added to Profiles page BadDCW column, to see bad dcw count identified for profile --------
------- added option: ECM_ALIVETIME VALUE: 35000 to config , set values between 17000 - 35000 --------
------- added some system info on Home page --------
------- if you want clean dcw's, for example for caid 1810, keep following rules: --------
------- don't use more instances of multics on one server and don't reconnect them among with --------
------- cache and cacheex and lines, if you needed more instances, always use as source --------
------- oscam cacheex mode 2 or oscams with local cards, each multics connect spearatelly to --------
------- external caches and cacheex and if needed to this source oscam --------
------- use oscam AIO only if you have under it local cards --------
------- for cacheex mode 2 without local cards, use standard oscam and not set there CW Cycle for requested caid --------
------- there is some issue in cacheex mode sending anyway bad dcw, or generating them --------
------- this import to multics as configs examples --------
------- for r100 always keep configs structure as in examples or in one multics.cfg file !!! --------
------- for investigation of requested caid (1810) use newcamd connection to multics from --------
------- watching oscam, set there Cw Cycle only to LOG - only in this oscam !!! --------
------- and set loglines in first page of oscam to 1024 - 9999 to investigate it for about 3 hours lines --------
------- or use log to file --------
------- under Live Log set on Show Settings values BAD, LOG , NOK to red color --------
 

Ekli dosyalar

  • Multics-r100rc53-Public_Insider-BrokenArrow....zip
    418.9 KB · Görüntüleme: 60

sotirsotiri

New member
Katılım
8 Ara 2021
Mesajlar
18
Tepkime puanı
6
Puanları
3
Ofline
RC versions looks great!!
 

mardock2009

New member
Katılım
15 Şub 2022
Mesajlar
14
Tepkime puanı
6
Puanları
3
Ofline
crash always after press buton SERVERS all rest working
 

mardock2009

New member
Katılım
15 Şub 2022
Mesajlar
14
Tepkime puanı
6
Puanları
3
Ofline
my file server.cfg working on v52 not understand why not in v53
##########################
N: domain port user pass deskey
##########################
all what I have there
Anybody knows what's going on
 

Astra2

Süper Moderator
Yönetici
Katılım
13 Eki 2020
Mesajlar
162
Tepkime puanı
305
Puanları
76
Ofline
my file server.cfg working on v52 not understand why not in v53
##########################
N: domain port user pass deskey
##########################
all what I have there
Anybody knows what's going on
yes but rc is not the same as rc52 should be a good configuracia
 

Astra2

Süper Moderator
Yönetici
Katılım
13 Eki 2020
Mesajlar
162
Tepkime puanı
305
Puanları
76
Ofline
Can you please post this good configuracia thanks
HTTP TITLE: "My Server"
HTTP PORT: xxxxxx
HTTP USER: admin
HTTP PASS: xxxxxxxxxx
HTTP AUTOREFRESH: 1
HTTP RESTART: ON
HTTP EDITOR: 1

HTTP TURBOMODE: ON
HTTP IPTABLES: YES
IPTABLES FLUSHONSTART: NO
HTTP NETTUNNING: YES
HTTP NETTUNNINGONSTART: NO
HTTP PARAMETERS: YES
HTTP BADDCW: YES

#TELNET PORT: 56230
#TELNET USER: root
#TELNET PASS: ivanpl,

CACHE PORT: 6500
CACHE ALIVETIME: 35
CACHE FILTER: NO
CACHE THRESHOLD: 0
CACHE FILTER TIME: 0
#CACHE AUTOADD: NO # block all unknown peers
#CACHE AUTOADD: YES YES # add all unknown peers and set their status to inactive (disabled)
CACHE AUTOADD: NO, NO # add all unknown peers and set their status to active (enabled)
CACHE KEEPALIVE: YES
CACHE DCWCHECK: YES
CACHE DCWCHECK2: YES
CACHE DCWCHECK3: YES

############################################################
############################################################

#==========================================================
#== INCLUDES ==
#==========================================================
INCLUDE "/var/etc/Cache.cfg"
INCLUDE "/var/etc/NEWcam.cfg"
INCLUDE "/var/etc/MGcam.cfg"
INCLUDE "/var/etc/CCcam.cfg"
INCLUDE "/var/etc/Camd35.cfg"
#INCLUDE "/var/etc/CS378x.cfg"
INCLUDE "/var/etc/Cacheex.cfg"

#==========================================================
#== INCLUDES CONFIG ==
#==========================================================
#INCLUDE "/usr/local/etc/multics/SCS81.css"
INCLUDE "/var/etc/CCcam.channelinfo"
INCLUDE "/var/etc/CCcam.providers"
#INCLUDE "/usr/local/etc/multics/CCcam.prio"
#==========================================================
#== FILES ==
#==========================================================
#FILE CHANNELINFO: "/usr/local/etc/multics/CCcam.channelinfo"
#FILE PROVIDERINFO: "/usr/local/etc/multics/CCcam.providers"
#FILE CCCAMPRIO: "/usr/local/etc/multics/CCcam.prio"
#FILE IP2COUNTRY: "/usr/local/etc/multics/ip2country.csv"
#FILE STYLESHEET: "/multics/etc/BICHO1980HD.css"

###########################################################################################

#DEBUG_CODE 1890:
#DEBUG_CODE 1891:

AUTOREMOVE_LOG_FILES_ABOVE_10M ACTIVE: YES

ECM_ALIVETIME VALUE: 35000

BAD_DCW_CS378X_DEBUG ACTIVE: YES

#COLORS TEXT CONNECTED: white

##CPU CORE_BALANCER: 19000 #0 - 600000 Higher value = lower CPU usage in % , recommended 20000 or 0

##CPU THREADS_BALANCER: 100 #0 - 100000 experimental , recommended 0

RESHARE LEVEL: NO

NDS_AI_OPTION ACTIVE: NO

NDS_AI_CONSOLE ACTIVE: NO

AUTO_UPDATE ON: NO

CACHE_THRESHOLD_PROFILE ACTIVE: NO

#CUSTOM STRING: -xDecrypt-Digital-Technologies™

#CUSTOM ID_CACHE:

LOADAVERAGE RESTART: 700

TURBOMODE ACTIVE: YES

DCW_MINTIME_SET MS: 0
MINTIME: 0

CACHE MINHITS: 0
CACHE LOWHITS_AUTODISABLE_AFTERSECONDS: 0
CACHE CHECK_INACTIVE_EVERYSECONDS: 0
CACHE REMARK_INACTIVE_AFTERSECONDS_INACTIVITY: 0

#experimental for testing , you can disable servers with 0% ecm ok and <10% ecm ok
AUTO_DISABLE_SERVERS ZERO: NO
AUTO_DISABLE_SERVERS ZERO_AFTER_SECONDS: 600
AUTO_DISABLE_SERVERS ZERO_TEN: NO
AUTO_DISABLE_SERVERS ZERO_TEN_AFTER_SECONDS: 0

IPTABLES CACHE: ON
IPTABLES NEWCAMD: ON
IPTABLES MGCAMD: ON
IPTABLES CCCAM: ON
IPTABLES CS378X: OFF
IPTABLES SOFTMODE: ON
IPTABLES FORCEMODE: OFF

# don't touch - internal- use only buttons !!!
MULTICS_PROFILES POWERSAVE: NO
MULTICS_PROFILES MINIMAL: NO
MULTICS_PROFILES DEFAULT: YES
MULTICS_PROFILES PERFORMANCE: NO
MULTICS_PROFILES MAX: NO

# don't touch - internal- use only buttons !!!
VPS_PROFILES POWERSAVE: NO
VPS_PROFILES DEFAULT: NO
VPS_PROFILES BALANCED: NO
VPS_PROFILES VIRT-G: YES
VPS_PROFILES KVM: NO


HWPAIRING KEY: 80E89021CF845006FE231575278A6E53C2E3B2FC14B783D95D015A6067F487D2127A38ECA36D0831000A5668109487301D9029EBABAEA3CB876DED7DB3EEC04C


##########################################################
## PROFILES DEFAULT VALUES
##########################################################
DEFAULT KEY: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
DEFAULT DCW MAXFAILED: 0
DEFAULT SERVER FIRST: 0
DEFAULT SERVER MAX: 0
DEFAULT SERVER THRESHOLD: 0
DEFAULT DCW TIMEOUT: 5000
DEFAULT CACHE TIMEOUT: 800
DEFAULT SERVER INTERVAL: 320
DEFAULT SERVER TIMEOUT: 5000
DEFAULT CACHE VALIDECMTIME: 0
DEFAULT CACHEEX VALIDECMTIME: 0
DEFAULT SERVER VALIDECMTIME: 0
DEFAULT DCW RETRY: 0
DEFAULT RETRY NEWCAMD: 0
DEFAULT RETRY CCCAM: 0
DEFAULT DCW CHECK: YES
DEFAULT ECM CHECK LENGTH: NO
DEFAULT CACHE SENDREQ: YES
DEFAULT CACHE RESENDREQ: YES
DEFAULT CACHE SENDREP: YES
DEFAULT CACHEEX MAXHOP: 2
DEFAULT ENABLE CCCAM: YES
DEFAULT ENABLE MGCAMD: YES
DEFAULT ENABLE NEWCAMD: YES
DEFAULT ENABLE CACHE: YES
DEFAULT ENABLE CACHEEX: YES
DEFAULT ACCEPT NULL SID: NO
DEFAULT ACCEPT NULL CAID: YES
DEFAULT ACCEPT NULL PROVIDER: YES
DEFAULT CACHE STATIC: YES
UPDATE ONCHANGE: YES

#LOGLEVEL: (0 -> CRITICAL, 1->ERROR, 2->WARNING,3->INFO, 4->DEBUG, 5->TRACE)
LOGLEVEL: 2 # ERROR

LOGLEVEL_BADDCW: 4 # debug

## Change you clientid (in hex) by default it is Generic
NEWCAMD CLIENTID: 6E73
NEWCAMD KEEPALIVE: YES
NEWCAMD DCW CHECK: YES
# Mgcamd (6D67)
# Newcs (6E73)
# Evocamd(6576)
# CCcam (4343)
# Radegast(7264)


#################PROFILES#######################
 

Astra2

Süper Moderator
Yönetici
Katılım
13 Eki 2020
Mesajlar
162
Tepkime puanı
305
Puanları
76
Ofline
HTTP TITLE: "My Server"
HTTP PORT: xxxxxx
HTTP USER: admin
HTTP PASS: xxxxxxxxxx
HTTP AUTOREFRESH: 1
HTTP RESTART: ON
HTTP EDITOR: 1

HTTP TURBOMODE: ON
HTTP IPTABLES: YES
IPTABLES FLUSHONSTART: NO
HTTP NETTUNNING: YES
HTTP NETTUNNINGONSTART: NO
HTTP PARAMETERS: YES
HTTP BADDCW: YES

#TELNET PORT: 56230
#TELNET USER: root
#TELNET PASS: ivanpl,

CACHE PORT: 6500
CACHE ALIVETIME: 35
CACHE FILTER: NO
CACHE THRESHOLD: 0
CACHE FILTER TIME: 0
#CACHE AUTOADD: NO # block all unknown peers
#CACHE AUTOADD: YES YES # add all unknown peers and set their status to inactive (disabled)
CACHE AUTOADD: NO, NO # add all unknown peers and set their status to active (enabled)
CACHE KEEPALIVE: YES
CACHE DCWCHECK: YES
CACHE DCWCHECK2: YES
CACHE DCWCHECK3: YES

############################################################
############################################################

#==========================================================
#== INCLUDES ==
#==========================================================
INCLUDE "/var/etc/Cache.cfg"
INCLUDE "/var/etc/NEWcam.cfg"
INCLUDE "/var/etc/MGcam.cfg"
INCLUDE "/var/etc/CCcam.cfg"
INCLUDE "/var/etc/Camd35.cfg"
#INCLUDE "/var/etc/CS378x.cfg"
INCLUDE "/var/etc/Cacheex.cfg"

#==========================================================
#== INCLUDES CONFIG ==
#==========================================================
#INCLUDE "/usr/local/etc/multics/SCS81.css"
INCLUDE "/var/etc/CCcam.channelinfo"
INCLUDE "/var/etc/CCcam.providers"
#INCLUDE "/usr/local/etc/multics/CCcam.prio"
#==========================================================
#== FILES ==
#==========================================================
#FILE CHANNELINFO: "/usr/local/etc/multics/CCcam.channelinfo"
#FILE PROVIDERINFO: "/usr/local/etc/multics/CCcam.providers"
#FILE CCCAMPRIO: "/usr/local/etc/multics/CCcam.prio"
#FILE IP2COUNTRY: "/usr/local/etc/multics/ip2country.csv"
#FILE STYLESHEET: "/multics/etc/BICHO1980HD.css"

###########################################################################################

#DEBUG_CODE 1890:
#DEBUG_CODE 1891:

AUTOREMOVE_LOG_FILES_ABOVE_10M ACTIVE: YES

ECM_ALIVETIME VALUE: 35000

BAD_DCW_CS378X_DEBUG ACTIVE: YES

#COLORS TEXT CONNECTED: white

##CPU CORE_BALANCER: 19000 #0 - 600000 Higher value = lower CPU usage in % , recommended 20000 or 0

##CPU THREADS_BALANCER: 100 #0 - 100000 experimental , recommended 0

RESHARE LEVEL: NO

NDS_AI_OPTION ACTIVE: NO

NDS_AI_CONSOLE ACTIVE: NO

AUTO_UPDATE ON: NO

CACHE_THRESHOLD_PROFILE ACTIVE: NO

#CUSTOM STRING: -xDecrypt-Digital-Technologies™

#CUSTOM ID_CACHE:

LOADAVERAGE RESTART: 700

TURBOMODE ACTIVE: YES

DCW_MINTIME_SET MS: 0
MINTIME: 0

CACHE MINHITS: 0
CACHE LOWHITS_AUTODISABLE_AFTERSECONDS: 0
CACHE CHECK_INACTIVE_EVERYSECONDS: 0
CACHE REMARK_INACTIVE_AFTERSECONDS_INACTIVITY: 0

#experimental for testing , you can disable servers with 0% ecm ok and <10% ecm ok
AUTO_DISABLE_SERVERS ZERO: NO
AUTO_DISABLE_SERVERS ZERO_AFTER_SECONDS: 600
AUTO_DISABLE_SERVERS ZERO_TEN: NO
AUTO_DISABLE_SERVERS ZERO_TEN_AFTER_SECONDS: 0

IPTABLES CACHE: ON
IPTABLES NEWCAMD: ON
IPTABLES MGCAMD: ON
IPTABLES CCCAM: ON
IPTABLES CS378X: OFF
IPTABLES SOFTMODE: ON
IPTABLES FORCEMODE: OFF

# don't touch - internal- use only buttons !!!
MULTICS_PROFILES POWERSAVE: NO
MULTICS_PROFILES MINIMAL: NO
MULTICS_PROFILES DEFAULT: YES
MULTICS_PROFILES PERFORMANCE: NO
MULTICS_PROFILES MAX: NO

# don't touch - internal- use only buttons !!!
VPS_PROFILES POWERSAVE: NO
VPS_PROFILES DEFAULT: NO
VPS_PROFILES BALANCED: NO
VPS_PROFILES VIRT-G: YES
VPS_PROFILES KVM: NO


HWPAIRING KEY: 80E89021CF845006FE231575278A6E53C2E3B2FC14B783D95D015A6067F487D2127A38ECA36D0831000A5668109487301D9029EBABAEA3CB876DED7DB3EEC04C


##########################################################
## PROFILES DEFAULT VALUES
##########################################################
DEFAULT KEY: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
DEFAULT DCW MAXFAILED: 0
DEFAULT SERVER FIRST: 0
DEFAULT SERVER MAX: 0
DEFAULT SERVER THRESHOLD: 0
DEFAULT DCW TIMEOUT: 5000
DEFAULT CACHE TIMEOUT: 800
DEFAULT SERVER INTERVAL: 320
DEFAULT SERVER TIMEOUT: 5000
DEFAULT CACHE VALIDECMTIME: 0
DEFAULT CACHEEX VALIDECMTIME: 0
DEFAULT SERVER VALIDECMTIME: 0
DEFAULT DCW RETRY: 0
DEFAULT RETRY NEWCAMD: 0
DEFAULT RETRY CCCAM: 0
DEFAULT DCW CHECK: YES
DEFAULT ECM CHECK LENGTH: NO
DEFAULT CACHE SENDREQ: YES
DEFAULT CACHE RESENDREQ: YES
DEFAULT CACHE SENDREP: YES
DEFAULT CACHEEX MAXHOP: 2
DEFAULT ENABLE CCCAM: YES
DEFAULT ENABLE MGCAMD: YES
DEFAULT ENABLE NEWCAMD: YES
DEFAULT ENABLE CACHE: YES
DEFAULT ENABLE CACHEEX: YES
DEFAULT ACCEPT NULL SID: NO
DEFAULT ACCEPT NULL CAID: YES
DEFAULT ACCEPT NULL PROVIDER: YES
DEFAULT CACHE STATIC: YES
UPDATE ONCHANGE: YES

#LOGLEVEL: (0 -> CRITICAL, 1->ERROR, 2->WARNING,3->INFO, 4->DEBUG, 5->TRACE)
LOGLEVEL: 2 # ERROR

LOGLEVEL_BADDCW: 4 # debug

## Change you clientid (in hex) by default it is Generic
NEWCAMD CLIENTID: 6E73
NEWCAMD KEEPALIVE: YES
NEWCAMD DCW CHECK: YES
# Mgcamd (6D67)
# Newcs (6E73)
# Evocamd(6576)
# CCcam (4343)
# Radegast(7264)


#################PROFILES#######################
1645041517703.png
 

sedat

New member
Katılım
20 Tem 2020
Mesajlar
5
Tepkime puanı
3
Puanları
3
Ofline
no working for my tried but crashes on server all my servers are dead when i switch to 53
 

moretv

New member
Katılım
14 Ara 2021
Mesajlar
4
Tepkime puanı
0
Puanları
1
Ofline
Uptime: 00d 03:07:15
Total Profiles: 8
Total Servers: 38
Total Cache Servers: 1
Total CCcam Servers: 1
Total Mgcamd Servers: 1
Total Camd35 Servers: 1
Total cs378x Servers: 1
NodeID = 5231303040a44b6f
Total Physical Memory Usage: 10 MB (1.02 %)
Total Virtual Memory Usage: 775 MB
CPU Usage: 6.40 %



I have put the configuration and others in multics.cfg with the order of the example
 

mardock2009

New member
Katılım
15 Şub 2022
Mesajlar
14
Tepkime puanı
6
Puanları
3
Ofline
everything works until press server list buton then trying to show my 200 servers freeze and crash config is up to date from rc53

everything else works just servers list problem
 

madroal

Member
Katılım
1 Eki 2020
Mesajlar
17
Tepkime puanı
34
Puanları
13
Ofline
CCcam.providers is simply the reason for the crash so you have to skip it.
#FILE PROVIDERINFO: "/var/etc/multics/CCcam.providers"
 

polo

New member
Katılım
11 Ara 2021
Mesajlar
11
Tepkime puanı
3
Puanları
3
Ofline
hi there is a new version 54
 
Durum
Üzgünüz bu konu cevaplar için kapatılmıştır...
Üst