OSCam Güncel Latest Oscam with emu
- Konuyu Başlatan kingsman
- Başlangıç tarihi
Ofline
oscam-git11872-802
show the source name of cacheex peers in the webif
* possible to show the source name of cacheex peers in the webif. so not only cache3 is shown but also the name of the cacheex reader.
option can be enabled by setting show_cacheex_source_name = 1 in the config or in the webif under global settings.
thanks to w33dburner for the orignal patch and also for allowing to use it.
show the source name of cacheex peers in the webif
* possible to show the source name of cacheex peers in the webif. so not only cache3 is shown but also the name of the cacheex reader.
option can be enabled by setting show_cacheex_source_name = 1 in the config or in the webif under global settings.
thanks to w33dburner for the orignal patch and also for allowing to use it.
Ofline
oscam-git11874-802
Changeset 11873
* Simplify entitlements_bit.html code (introduce more general function that could be reused, get rid of unnecessary function)
Changeset 11874
Fix "CacheEX AIO Logging" config section always show on webif although CS_CACHEEX_AIO is not selected
Changeset 11873
* Simplify entitlements_bit.html code (introduce more general function that could be reused, get rid of unnecessary function)
Changeset 11874
Fix "CacheEX AIO Logging" config section always show on webif although CS_CACHEEX_AIO is not selected
Ofline
oscam-git11876-802
Changeset 11875
Revert "Fix for tiers start date and expire date on 09C7, 098E, and 09EF
Changeset 11876
Display 1970-01-01 on NDS card that doesn't have start date data on card answer.
* Previously, OSCam displayed 2032-01-01 or 2031-12-31 (depends on system that oscam is running on) in case of 09C7, 098E, and 09EF cards as baseyear for these cards are 2020. This could be varied based on card baseyear, for example, 0927 card displayed 2020-01-01 or 2019-12-31 (depends on system that oscam is running on) as baseyear for 0927 card is 2008. However, all of the mentioned cards above do not have tiers start date data on card response. Hence, those date are practically come from card status 90 20 which is incorrect. That's why I issue this patch to display it as 1970-01-01 to be consistent with ins76 reading.
N.B. 0x90 means 144 months from January of card baseyear. That's why you see 2032 and 2020 years there.
Changeset 11875
Revert "Fix for tiers start date and expire date on 09C7, 098E, and 09EF
Changeset 11876
Display 1970-01-01 on NDS card that doesn't have start date data on card answer.
* Previously, OSCam displayed 2032-01-01 or 2031-12-31 (depends on system that oscam is running on) in case of 09C7, 098E, and 09EF cards as baseyear for these cards are 2020. This could be varied based on card baseyear, for example, 0927 card displayed 2020-01-01 or 2019-12-31 (depends on system that oscam is running on) as baseyear for 0927 card is 2008. However, all of the mentioned cards above do not have tiers start date data on card response. Hence, those date are practically come from card status 90 20 which is incorrect. That's why I issue this patch to display it as 1970-01-01 to be consistent with ins76 reading.
N.B. 0x90 means 144 months from January of card baseyear. That's why you see 2032 and 2020 years there.
Below you have the required version for ubuntu 20.04.x64
Unix Starttime: 1742738912
Starttime: 23.03.2025 14:08:32
Build Date: 23.03.2025 13:37:07
Version: 2.25.03-11877@cd33226c
Compiler: x86_64-linux-gnu-libdvbcsa
Box Type: generic (generic)
PID: 1566
TempDir: /tmp/.oscam
GBox tmp_dir: not defined using: /tmp/.oscam
ConfigDir: /var/oscam/
WebifPort:
Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Compressed pages: yes
SSL support: no
DVB API support: yes
DVB API with extended CW API support: yes
DVB API with Stream Relay support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API with NEUTRINO support: no
DVB API read-sdt charsets: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
Cache exchange AIO support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Clockfix with realtime clock: yes
IPv6 support: no
camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: no
constant CW: no
Pandora: no
ghttp: no
Streamrelay: yes
Reader support: yes
Nagra: yes
Nagra Merlin: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes
Unix Starttime: 1742738912
Starttime: 23.03.2025 14:08:32
Build Date: 23.03.2025 13:37:07
Version: 2.25.03-11877@cd33226c
Compiler: x86_64-linux-gnu-libdvbcsa
Box Type: generic (generic)
PID: 1566
TempDir: /tmp/.oscam
GBox tmp_dir: not defined using: /tmp/.oscam
ConfigDir: /var/oscam/
WebifPort:
Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Compressed pages: yes
SSL support: no
DVB API support: yes
DVB API with extended CW API support: yes
DVB API with Stream Relay support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API with NEUTRINO support: no
DVB API read-sdt charsets: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
Cache exchange AIO support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Clockfix with realtime clock: yes
IPv6 support: no
camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: no
constant CW: no
Pandora: no
ghttp: no
Streamrelay: yes
Reader support: yes
Nagra: yes
Nagra Merlin: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes
Ofline
oscam-git11878-802
Resolve "Reduce CPU usage on using Newcamd"
* Fix build errors on EuroDes
* There is a performance issue of DES handling in Newcamd code.
1. While rightRot can be unrolled for tiny improvement, the leftRot implementation is a nightmare.
Instead of repeating rightRot 27 times, do it the proper way.
2. Also EuroDes is always called with the same desMode. As TestBit(desMode, F_TRIPLE_DES) always succeeds, drop Eurocrypt S2/M dead code.
Resolve "Reduce CPU usage on using Newcamd"
* Fix build errors on EuroDes
* There is a performance issue of DES handling in Newcamd code.
1. While rightRot can be unrolled for tiny improvement, the leftRot implementation is a nightmare.
Instead of repeating rightRot 27 times, do it the proper way.
2. Also EuroDes is always called with the same desMode. As TestBit(desMode, F_TRIPLE_DES) always succeeds, drop Eurocrypt S2/M dead code.
Ofline
oscam-git11880-802
Changeset 11879
Fix spelling errors on Readers Write EMM page
Changeset 11880
* css: fix skin and add hover
* Scan USB: optimize css table
* Status: small visual adjustments
* Status, Reader, User, Cacheex, Services: add mouse over effect
Changeset 11879
Fix spelling errors on Readers Write EMM page
Changeset 11880
* css: fix skin and add hover
* Scan USB: optimize css table
* Status: small visual adjustments
* Status, Reader, User, Cacheex, Services: add mouse over effect
Ofline
oscam-git11882-802
gcc-15: Fix unterminated-string-initialization build warnings
* warning: initializer-string for array of ‘char’ truncates NUL terminator but destination lacks ‘nonstring’ attribute (65 chars into 64 available) [-Wunterminated-string-initialization]
gcc-15: Fix unterminated-string-initialization build warnings
* warning: initializer-string for array of ‘char’ truncates NUL terminator but destination lacks ‘nonstring’ attribute (65 chars into 64 available) [-Wunterminated-string-initialization]