OSCam Güncel Latest Oscam with emu

[kingsman]

oscam-git11905-802

Resolve "Loadbalancer - fallback adjustment"
* Allow lb_nfb_readers to be set to zero (previously minimum was 1). This means you can configure the system to have no fallback readers if desired.
* If only one reader matches and double_check is enabled (and the CAID matches), the patch forces a fallback check by setting force_reopen = 1.

 

[kingsman]

oscam-git11906-802

* Use fixed-width 64-bit integer format macros

Replaced all hardcoded %lld format specifiers with the portable
inttypes.h macros PRId64 (for printing) and SCNd64 (for scanning).
This ensures correct 64-bit integer handling across 32-bit and
64-bit systems, improves cross-platform compatibility, and avoids
potential issues with long long size differences on various compilers
or architectures..

 

[samy mohsen]

oscam-git11906-802

* Use fixed-width 64-bit integer format macros

Replaced all hardcoded %lld format specifiers with the portable
inttypes.h macros PRId64 (for printing) and SCNd64 (for scanning).
This ensures correct 64-bit integer handling across 32-bit and
64-bit systems, improves cross-platform compatibility, and avoids
potential issues with long long size differences on various compilers
or architectures..

Does this version work on Ubuntu 20?Or it doesn't work

 

[kingsman]

oscam-git11907-802

dvbapi: add support for more net send clients

* connections established with client_proto_version = 3 and extended_cw_api >= 1 can now also process CW_ALGO_CSA_ALT independently
* proper handling of dvbapi_ioctl commands in this case
* fix rerouting of msgid back to client
* support each videoguard caid
* make sure ecm.info is created

 

[samy mohsen]

oscam-git11907-802

dvbapi: add support for more net send clients

* connections established with client_proto_version = 3 and extended_cw_api >= 1 can now also process CW_ALGO_CSA_ALT independently
* proper handling of dvbapi_ioctl commands in this case
* fix rerouting of msgid back to client
* support each videoguard caid
* make sure ecm.info is created

Please ensure the OSCAM version works on Ubuntu 20.

 

[kingsman]

Please ensure the OSCAM version works on Ubuntu 20.

why ? update your librairies version

 

[samy mohsen]

Please send me the library update command if possible.

why ? update your librairies version

 

[kingsman]

oscam-git11911-802

* add get_ecm_mode() inline function to extract the lower nibble from last ECM byte for VideoGuard CAIDs
* move select_csa_alt() from module-dvbapi.c to globals.h for shared use
* allow empty CAID setting in streamrelay config to autodetect csa-alt ecm
* disconnect stream client immediately when CAID is not allowed
* fix "caid not enabled" log message to show actual CAID instead of FFFE
* log ecm_mode changes and libdvbcsa table feedback (if available)
* simplify streamrelay support output in version info
* add msgid to DVBAPI_ECM_INFO message, so the client can correctly assign the ecm information to the requesting service
* add dvbapi_srvip configuration option to bind TCP listener to a specific IP address instead of all interfaces (ADDR_ANY)
* supports both IPv4 and IPv6 addresses
* default: none (binds to all interfaces, same behavior as before)
* add webif configuration and documentation
(thx Basic.Master)
* Fix CMake project warning
call cmake_minimum_required before project

 

[kingsman]

oscam-git11914-802

dvbapi: fix support for more net send clients
* do not open ca device when ca_soft_csa is active
webif: display "camd.socket" and "local" instead of null/localhost IP
* display "camd.socket" for dvbapi socket connections
* display "local" for local card readers
dvbapi: fix listen_port not showing up in webif config after restart
The configured listen_port value was reset to 0 in dvbapi_detect_api() for incompatible boxtypes, which caused the webif to show an empty field
after restart even though the value was correctly saved in oscam.conf.

Introduce separate runtime variable dvbapi_listenport_active for the actual port used by dvbapi logic, preserving cfg.dvbapi_listenport for
config storage and webif display.

 

[kingsman]

oscam-git11918-802

warnings: fix gcc16 -Wunused-but-set-variable warnings
* remove or restructure unused loop counter variables that trigger warnings with GCC 16+
* oscam-config-account.c: remove unused 'i' in account_allowedprotocols_fn()
* oscam-conf-chk.c: remove unused 'i' in chk_cacheex_hitvaluetab() and chk_tuntab()
* module-stat.c: wrap 'count' in #ifdef WITH_DEBUG (only used for debug logging)
* module-webif.c: remove unused 'i' in send_oscam_status() and send_oscam_api(), move 'i' into #ifdef CS_CACHEEX_AIO block in send_oscam_cacheex()

cardreader: add amlogic smc internal smartcard reader support
Add support for amlogic smc internal smartcard reader interface.
This enables OSCam to use the built-in smartcard slot on amlogic-based
set-top boxes and media players that use the native amlogic smartcard driver which exposes /dev/smc0. (thx rozpruwacz)

Changes:
- CMakeLists.txt: add amlogic cross-compile target and USE_AMSMC flag
- Makefile: add ifd_amsmc.c to build, help text and example
- config.h: add CARDREADER_INTERNAL_AMSMC preprocessor logic
- config.sh: add USE_AMSMC and WITH_AMSMC flag handling
- csctapi/cardreaders.h: declare cardreader_internal_amsmc
- csctapi/ifd_amsmc.c: new file - amlogic smartcard reader driver
- module-webif-tpl.c: add AMSMC to webif template conditionals
- oscam.c: register amlogic cardreader in version info and cardreaders array

Fix aio_version buffer size mismatch in cacheex feature exchange
* fix break indentation
* fix ancient build
* Fix aio_version buffer size mismatch in cacheex feature exchange

* Fix pages gen prid64 warning introduced in 11906

 

[kingsman]

oscam-git11919-802

Update README.md
* modernizing and update to the readme.md

 

[kingsman]

oscam-git11920-802

* fix: module monitor
print date|time instead of time twice

 

[kingsman]

oscam-git11921-802

webif: add service counter